Skip to content

Ch 4 · Moving Charges and Magnetism

Solved Examples

Exercise 1 of 3

NCERT Solutions – Solved Examples

Class 12 Physics · Chapter 4 · Moving Charges and Magnetism · 12 solved examples · Session 2026-27

Example 4.1
A straight wire of mass $200\,\text{g}$ and length $1.5\,\text{m}$ carries a current of $2\,\text{A}$. It is held up in mid-air by a uniform horizontal magnetic field $B$. Find the magnitude of $B$.
Solution

Force on a current-carrying conductor: $$\vec{F} = I\,\vec{L}\times\vec{B},\qquad F = BIL\sin\theta$$

For the wire to float, the magnetic force must balance its weight, and $B$ must be perpendicular to the wire ($\theta = 90^\circ$) for maximum force.

  1. Equilibrium: $BIL = mg$.
  2. $B = \dfrac{mg}{IL} = \dfrac{0.200 \times 9.8}{2 \times 1.5}$.
  3. $B = \dfrac{1.96}{3} = 0.65\,\text{T}$.

Answer: $B \approx 0.65\,\text{T}$, directed horizontally and perpendicular to the wire, with the current such that $I\vec{L}\times\vec{B}$ points vertically upward.

Example 4.2
A magnetic field points along $+\hat{y}$ and a charged particle moves along $+\hat{x}$. Find the direction of the Lorentz force for
  1. (a) an electron and
  2. (b) a proton.
Solution

Lorentz force: $$\vec{F} = q\,\vec{v}\times\vec{B}$$

  1. First compute $\vec{v}\times\vec{B} = (v\hat{i})\times(B\hat{j}) = vB(\hat{i}\times\hat{j}) = vB\,\hat{k}$ — i.e. along $+\hat{z}$.
  2. (a) Electron ($q = -e$): $\vec{F} = -e\,vB\,\hat{k}$ — directed along $\mathbf{-\hat{z}}$.
  3. (b) Proton ($q = +e$): $\vec{F} = +e\,vB\,\hat{k}$ — directed along $\mathbf{+\hat{z}}$.

Note: the force is perpendicular to both $\vec{v}$ and $\vec{B}$, so it does no work and only changes the direction of motion, never the speed.

Answer: Electron: along $-\hat{z}$. Proton: along $+\hat{z}$ — equal in magnitude, opposite in direction.

Example 4.3
An electron (mass $9\times10^{-31}\,\text{kg}$, charge $1.6\times10^{-19}\,\text{C}$) moves at $3\times10^{7}\,\text{m/s}$ perpendicular to a magnetic field of $6\times10^{-4}\,\text{T}$. Find the radius of its path, its frequency of revolution, and its energy in keV.
Solution

Circular motion in a magnetic field: $$qvB = \frac{mv^{2}}{r} \;\Rightarrow\; r = \frac{mv}{qB},\qquad \nu = \frac{qB}{2\pi m}$$

  1. Radius: $r = \dfrac{9\times10^{-31}\times3\times10^{7}}{1.6\times10^{-19}\times6\times10^{-4}} = \dfrac{2.7\times10^{-23}}{9.6\times10^{-23}}$.
  2. $r = 0.28\,\text{m} = 28\,\text{cm}$.
  3. Frequency: $\nu = \dfrac{v}{2\pi r} = \dfrac{3\times10^{7}}{2\pi \times 0.28} = \dfrac{3\times10^{7}}{1.76}$.
  4. $\nu = 1.7\times10^{7}\,\text{Hz} = 17\,\text{MHz}$.
  5. Energy: $E = \tfrac12 m v^{2} = \tfrac12 \times 9\times10^{-31}\times(3\times10^{7})^{2}$.
  6. $E = \tfrac12 \times 9\times10^{-31}\times9\times10^{14} = 4.05\times10^{-16}\,\text{J}$.
  7. In eV: $\dfrac{4.05\times10^{-16}}{1.6\times10^{-19}} = 2.5\times10^{3}\,\text{eV}$.

Note the frequency $\nu = \dfrac{qB}{2\pi m}$ is independent of the speed — the principle behind the cyclotron.

Answer: $r \approx 0.28\,\text{m}$, $\nu \approx 17\,\text{MHz}$, and $E \approx 2.5\,\text{keV}$.

Example 4.4
A current element $\Delta\vec{l} = \Delta x\,\hat{i}$ of length $\Delta x = 1\,\text{cm}$ is placed at the origin and carries a current $I = 10\,\text{A}$. Find the magnetic field it produces on the y-axis at a distance of $0.5\,\text{m}$.
Solution

Biot–Savart law: $$d\vec{B} = \frac{\mu_0}{4\pi}\frac{I\,d\vec{l}\times\hat{r}}{r^{2}}$$

  1. Here $d\vec{l} = \Delta x\,\hat{i}$ and the field point is on the y-axis, so $\hat{r} = \hat{j}$ and $r = 0.5\,\text{m}$.
  2. $d\vec{l}\times\hat{r} = \Delta x\,(\hat{i}\times\hat{j}) = \Delta x\,\hat{k}$ — so the field points along $+\hat{z}$, and $\theta = 90^\circ$.
  3. $|\Delta B| = \dfrac{\mu_0}{4\pi}\dfrac{I\,\Delta x}{r^{2}} = 10^{-7}\times\dfrac{10 \times 1\times10^{-2}}{(0.5)^{2}}$.
  4. $= 10^{-7}\times\dfrac{0.1}{0.25} = 10^{-7}\times0.4 = 4\times10^{-8}\,\text{T}$.

Answer: $\Delta \vec{B} = 4\times10^{-8}\,\text{T}$, directed along $+\hat{z}$ (out of the x–y plane).

Example 4.5
A wire carrying $12\,\text{A}$ is bent into a semicircular arc of radius $2.0\,\text{cm}$, with straight segments running along the diameter line on either side. Consider the field $B$ at the centre.
  1. (a) What is the contribution of the straight segments?
  2. (b) How does the semicircle's contribution compare with that of a full circular loop?
  3. (c) What is $B$ at the centre?
Solution

(a) For every element of the straight segments, $d\vec{l}$ points along the line through the centre, so $d\vec{l}$ and $\hat{r}$ are parallel or antiparallel ($\theta = 0^\circ$ or $180^\circ$), giving $d\vec{l}\times\hat{r} = 0$.

Field at the centre of a full loop: $$B_{\text{loop}} = \frac{\mu_0 I}{2R}$$

(b) Every element of the semicircle is at the same distance $R$ and contributes in the same direction, so the semicircle gives exactly half the field of a complete loop.

(c)

  1. $B = \tfrac12 \times \dfrac{\mu_0 I}{2R} = \dfrac{\mu_0 I}{4R}$.
  2. $B = \dfrac{4\pi\times10^{-7}\times12}{4\times0.02} = \dfrac{1.508\times10^{-5}}{0.08}$.
  3. $B = 1.9\times10^{-4}\,\text{T}$.

Answer: (a) The straight parts contribute nothing. (b) The semicircle gives half a full loop's field. (c) $B \approx 1.9\times10^{-4}\,\text{T}$, directed perpendicular to the plane of the arc.

Example 4.6
A tightly wound coil of 100 turns and radius $10\,\text{cm}$ carries a current of $1\,\text{A}$. Find the magnitude of the magnetic field at its centre.
Solution

Field at the centre of an N-turn coil: $$B = \frac{\mu_0 N I}{2R}$$

The coil is tightly wound, so all $N$ turns sit at effectively the same radius and their fields simply add.

  1. $B = \dfrac{4\pi\times10^{-7}\times100\times1}{2\times0.10}$.
  2. Numerator $= 4\pi\times10^{-5} = 1.257\times10^{-4}$.
  3. $B = \dfrac{1.257\times10^{-4}}{0.20} = 6.28\times10^{-4}\,\text{T}$.

Answer: $B \approx 6.3\times10^{-4}\,\text{T}$, along the axis, its direction given by the right-hand rule.

Example 4.7
A long straight wire of circular cross-section (radius $a$) carries a steady current $I$ distributed uniformly across the cross-section. Find the magnetic field in the regions $r < a$ and $r > a$.
Solution

Ampère’s circuital law: $$\oint \vec{B}\cdot d\vec{l} = \mu_0 I_{\text{enc}}$$

By symmetry $\vec{B}$ is tangential and constant in magnitude on any circle of radius $r$ centred on the axis, so $\oint\vec{B}\cdot d\vec{l} = B(2\pi r)$.

Outside the wire ($r > a$):

  1. The whole current is enclosed: $I_{\text{enc}} = I$.
  2. $B(2\pi r) = \mu_0 I \Rightarrow B = \dfrac{\mu_0 I}{2\pi r}$ — falling off as $1/r$, exactly as for a thin wire.

Inside the wire ($r < a$):

  1. The current is uniform, so the fraction enclosed is the area ratio: $I_{\text{enc}} = I\dfrac{\pi r^{2}}{\pi a^{2}} = I\dfrac{r^{2}}{a^{2}}$.
  2. $B(2\pi r) = \mu_0 I\dfrac{r^{2}}{a^{2}} \Rightarrow B = \dfrac{\mu_0 I r}{2\pi a^{2}}$ — growing linearly with $r$.
RegionFieldBehaviour
$r < a$$B = \dfrac{\mu_0 I r}{2\pi a^{2}}$Rises linearly from $0$ at the axis
$r = a$$B = \dfrac{\mu_0 I}{2\pi a}$Maximum — both expressions agree here
$r > a$$B = \dfrac{\mu_0 I}{2\pi r}$Falls off as $1/r$

Answer: $B \propto r$ inside and $B \propto 1/r$ outside, peaking at the surface $r = a$.

Example 4.8
A solenoid of length $0.5\,\text{m}$ and radius $1\,\text{cm}$ has 500 turns and carries a current of $5\,\text{A}$. Find the magnitude of the magnetic field inside it.
Solution

Field inside a long solenoid: $$B = \mu_0 n I,\qquad n = \frac{N}{L}$$

The solenoid is long compared with its radius ($0.5\,\text{m} \gg 0.01\,\text{m}$), so the interior field is uniform and the end effects are negligible.

  1. Turns per unit length: $n = \dfrac{500}{0.5} = 1000\,\text{turns/m}$.
  2. $B = 4\pi\times10^{-7} \times 1000 \times 5$.
  3. $B = 4\pi\times10^{-7}\times5000 = 6.28\times10^{-3}\,\text{T}$.

Answer: $B \approx 6.28\times10^{-3}\,\text{T}$, directed along the axis of the solenoid.

Example 4.9
The horizontal component of the earth's magnetic field at a place is $3.0\times10^{-5}\,\text{T}$, directed from geographic south to north. A long straight conductor carries a steady current of $1\,\text{A}$. Find the force per unit length on it when it lies on a horizontal table and is directed
  1. (a) east to west and
  2. (b) south to north.
Solution

Force per unit length: $$\frac{F}{L} = BI\sin\theta$$

(a) Conductor east–west:

  1. The field is south→north (horizontal); the current is east→west (horizontal). They are perpendicular, so $\theta = 90^\circ$.
  2. $\dfrac{F}{L} = 3.0\times10^{-5}\times1\times\sin90^\circ = 3\times10^{-5}\,\text{N/m}$.
  3. By $\vec{F} = I\vec{L}\times\vec{B}$, the force is vertical — directed vertically downward for a current flowing east to west.

(b) Conductor south–north:

  1. Now the current is parallel to the field, so $\theta = 0^\circ$ and $\sin\theta = 0$.
  2. $\dfrac{F}{L} = 0$.

Answer: (a) $3\times10^{-5}\,\text{N/m}$, directed vertically. (b) Zero — a current parallel to the field feels no force.

Example 4.10
A closely wound circular coil of 100 turns and radius $10\,\text{cm}$ carries $3.2\,\text{A}$.
  1. (a) Find the field at its centre.
  2. (b) Find its magnetic moment. The coil is placed in a vertical plane, free to rotate about a horizontal axis along its diameter, in a uniform horizontal field of $2\,\text{T}$, the coil's axis initially along the field. The coil then turns through $90^\circ$ under the field.
  3. (c) Find the magnitudes of the torque in the initial and final positions.
  4. (d) Find the angular speed acquired after turning through $90^\circ$, given a moment of inertia of $0.1\,\text{kg m}^2$.
Solution

(a)

  1. $B = \dfrac{\mu_0 N I}{2R} = \dfrac{4\pi\times10^{-7}\times100\times3.2}{2\times0.10} = \dfrac{4.02\times10^{-4}}{0.20}$.
  2. $B = 2.0\times10^{-3}\,\text{T}$.

(b)

Magnetic moment of a coil: $$m = N I A = N I \pi R^{2}$$

  1. $m = 100 \times 3.2 \times \pi (0.10)^{2} = 320 \times 3.14\times10^{-2}$.
  2. $m = 10\,\text{A m}^2$.

(c)

Torque on a magnetic dipole: $$\vec{\tau} = \vec{m}\times\vec{B},\qquad \tau = mB\sin\theta$$

  1. Initially $\theta = 0$ (coil axis along the field): $\tau_i = mB\sin0 = \mathbf{0}$.
  2. Finally $\theta = 90^\circ$: $\tau_f = mB\sin90^\circ = 10\times2 = \mathbf{20\,\text{N m}}$.

(d) The torque varies with angle, so integrate rather than use a constant-$\alpha$ formula. From Newton's second law for rotation, $I\dfrac{d\omega}{dt} = mB\sin\theta$, and by the chain rule $\dfrac{d\omega}{dt} = \dfrac{d\omega}{d\theta}\dfrac{d\theta}{dt} = \omega\dfrac{d\omega}{d\theta}$.

  1. $I\,\omega\,\dfrac{d\omega}{d\theta} = mB\sin\theta$.
  2. Separate and integrate from $\theta=0$ to $\theta=\pi/2$: $I\displaystyle\int_0^{\omega}\omega\,d\omega = mB\int_0^{\pi/2}\sin\theta\,d\theta$.
  3. $\dfrac{I\omega^{2}}{2} = mB\Big[-\cos\theta\Big]_0^{\pi/2} = mB(0-(-1)) = mB$.
  4. $\omega = \sqrt{\dfrac{2mB}{I}} = \sqrt{\dfrac{2\times10\times2}{0.1}} = \sqrt{400}$.
  5. $\omega = 20\,\text{rad/s}$.

Answer: (a) $B = 2.0\times10^{-3}\,\text{T}$. (b) $m = 10\,\text{A m}^2$. (c) $\tau_i = 0$, $\tau_f = 20\,\text{N m}$. (d) $\omega = 20\,\text{rad/s}$.

Example 4.11
  1. (a) A current-carrying circular loop lies on a smooth horizontal plane. Can a uniform magnetic field make it turn about its vertical axis?
  2. (b) A current-carrying loop sits in a uniform external field. If free to turn, what orientation is stable?
  3. (c) A loop of irregular shape carrying a current lies in a uniform field. What happens to its shape?
Solution

(a) No. The torque is $\vec{\tau} = \vec{m}\times\vec{B}$, and $\vec{m}$ is along the loop's vertical axis. The torque is therefore always perpendicular to $\vec{m}$, i.e. horizontal — it can tip the loop over, but it can never have a component along the vertical axis. So no uniform field can spin the loop about its own axis.

(b) The energy is $U = -\vec{m}\cdot\vec{B} = -mB\cos\theta$, minimised at $\theta = 0$. So the loop turns until its magnetic moment $\vec{m}$ is parallel to $\vec{B}$ — that is, the plane of the loop lies perpendicular to the field. ($\theta = 180^\circ$ is also an equilibrium but an unstable one.)

(c) Each element feels $d\vec{F} = I\,d\vec{l}\times\vec{B}$, which pushes the loop outward everywhere. The loop therefore tends to expand into the shape enclosing the greatest area for its perimeter — a circle. (The net force on any closed loop in a uniform field is still zero.)

Answer: (a) No — the torque is always perpendicular to $\vec{m}$. (b) $\vec{m}$ parallel to $\vec{B}$, i.e. the loop's plane perpendicular to the field. (c) It tends to become circular.

Example 4.12
In a circuit consisting of a $3\,\text{V}$ cell in series with a $3\,\Omega$ resistor, the current is to be measured. Find the current if the ammeter is
  1. (a) a galvanometer of resistance $R_G = 60.00\,\Omega$;
  2. (b) the same galvanometer converted to an ammeter by a shunt $r_s = 0.02\,\Omega$;
  3. (c) an ideal ammeter of zero resistance.
Solution

(a) Galvanometer alone: its full $60\,\Omega$ sits in the circuit.

  1. $I = \dfrac{3}{3 + 60} = \dfrac{3}{63} = 0.048\,\text{A}$.

(b) Galvanometer with shunt: the shunt is in parallel with the galvanometer.

  1. $R_{\text{eff}} = \dfrac{R_G\,r_s}{R_G + r_s} = \dfrac{60 \times 0.02}{60.02} = \dfrac{1.2}{60.02} = 0.02\,\Omega$.
  2. $I = \dfrac{3}{3 + 0.02} = \dfrac{3}{3.02} = 0.99\,\text{A}$.

(c) Ideal ammeter:

  1. $I = \dfrac{3}{3 + 0} = 1.00\,\text{A}$.
InstrumentAdded resistanceReadingError
Galvanometer alone$60\,\Omega$$0.048\,\text{A}$Hopeless — reads $\sim5\%$ of the true value
With shunt (ammeter)$0.02\,\Omega$$0.99\,\text{A}$About $1\%$ low — acceptable
Ideal ammeter$0$$1.00\,\text{A}$Exact

Answer: (a) $0.048\,\text{A}$, (b) $0.99\,\text{A}$, (c) $1.00\,\text{A}$ — showing why an ammeter must have a very small resistance and be connected in series.