Skip to content

Ch 14 · Semiconductor Electronics: Materials, Devices and Simple Circuits

Exercises

Exercise 2 of 3

NCERT Solutions – Chapter 14 Exercises

Class 12 Physics · Chapter 14 · Semiconductor Electronics: Materials, Devices and Simple Circuits · Session 2026-27

Question 14.1MCQ
In an n-type silicon, which of the following statement is true:
  1. (a) electrons are majority carriers and trivalent atoms are dopants,
  2. (b) electrons are minority carriers and pentavalent atoms are dopants,
  3. (c) holes are minority carriers and pentavalent atoms are dopants,
  4. (d) holes are majority carriers and trivalent atoms are dopants.
Solution

In n-type silicon, doping with a pentavalent impurity (like phosphorus) contributes extra free electrons, making electrons the majority charge carriers and holes the minority carriers.

Correct option: (c) holes are minority carriers and pentavalent atoms are dopants.

Question 14.2
Which of the statements given in Exercise 14.1 is true for p-type semiconductors:
  1. (a) electrons are majority carriers and trivalent atoms are the dopants,
  2. (b) electrons are minority carriers and pentavalent atoms are the dopants,
  3. (c) holes are minority carriers and pentavalent atoms are the dopants,
  4. (d) holes are majority carriers and trivalent atoms are the dopants.
Solution

In p-type silicon, doping with a trivalent impurity (like boron or aluminium) creates a deficiency of electrons, i.e. extra holes, making holes the majority carriers.

Correct option: (d) holes are majority carriers and trivalent atoms are the dopants.

Question 14.3
Carbon, silicon and germanium each have four valence electrons, with energy band gaps $(E_g)_C$, $(E_g)_{Si}$ and $(E_g)_{Ge}$ respectively. Which statement is true:
  1. (a) $(E_g)_{Si}<(E_g)_{Ge}<(E_g)_C$
  2. (b) $(E_g)_C<(E_g)_{Ge}>(E_g)_{Si}$
  3. (c) $(E_g)_C>(E_g)_{Si}>(E_g)_{Ge}$
  4. (d) $(E_g)_C=(E_g)_{Si}=(E_g)_{Ge}$?
Solution

Diamond (carbon) is an insulator with the largest band gap; silicon and germanium are semiconductors, with germanium having the smallest gap of the three.

Correct option: (c) $(E_g)_C>(E_g)_{Si}>(E_g)_{Ge}$.

Question 14.4
In an unbiased p-n junction, holes diffuse from the p-region to the n-region because:
  1. (a) free electrons in the n-region attract them,
  2. (b) they move across the junction due to the potential difference,
  3. (c) hole concentration in the p-region is more compared to the n-region,
  4. (d) all the above.
Solution

Diffusion is driven purely by the concentration gradient — holes are highly concentrated in the p-region and nearly absent in the n-region, so they naturally diffuse across to even out this difference (just as any gas diffuses from high to low concentration). This diffusion happens even in an unbiased junction, before any potential difference has been established across it.

Correct option: (c) hole concentration in the p-region is more compared to the n-region. (Options (a) and (b) describe the drift due to the junction's built-in field, which opposes diffusion — not the cause of the initial diffusion itself.)

Question 14.5MCQ
When a forward bias is applied to a p-n junction, it:
  1. (a) raises the potential barrier,
  2. (b) reduces the majority carrier current to zero,
  3. (c) lowers the potential barrier,
  4. (d) none of the above.
Solution

Forward bias connects the p-side to the positive terminal and the n-side to the negative terminal of the battery. This pushes majority carriers (holes in p, electrons in n) towards the junction, opposing and thinning the built-in depletion layer.

Correct option: (c) lowers the potential barrier — allowing a large majority-carrier current to flow.

Question 14.6
In half-wave rectification, what is the output frequency if the input frequency is $50\,Hz$? What is the output frequency of a full-wave rectifier for the same input?
Solution

A half-wave rectifier conducts only once per input cycle, so its output frequency equals the input frequency: $50\,Hz$.

A full-wave rectifier conducts twice per input cycle (once for each half), so its output frequency is double the input: $100\,Hz$.